Agnee Double Reduction Worm Gearboxes Selection Rating Chart-Horizontal Type

Send Enquiry
RATINGS OF TYPES : HD-OD-VD

AGNEE Double Reduction Speed Reducers are two stage worm reduction units. A specially designed primary worm reduction unit is integrally mounted on a standard single reduction AGNEE worm reducer which forms the second stage. The composite units provide the most compact and rigid arrangement for large reduction of speed necessary for slow moving machinery. A wide range of ratios upto 4900:1 is available.

The wormshafts are made of high quality case hardening steel, accurately generated, ground and super finished. The wormwheels comprise of phosphor bronze centrifugally cast rims of substantial sections welded to rigid centres. Considerable flexibility of shaft layout is permissible with all types of Double Reduction units. The dimension drawing for each series shows the different shaft handing arrangements and the appropriate reference should always be quoted when ordering.

Nominal Ratio	Nominal Input Speed r.p.m.	Nominal Output Speed r.p.m.	SIZE OF UNIT
			100		125		150		175		200
			Input KW	Output Torque Nm	Input KW	Output Torque Nm	Input KW	Output Torque Nm	Input KW	Output Torque Nm	Input KW	Output Torque Nm
150/1	750 1000 1500	5.00 6.66 10.0	0.83 1.07 1.42	972.17 931.95 883.88	1.53 1.94 2.53	1805 1736 15.99	2.24 2.76 3.65	2864 2737 2531	3.15 3.95 5.15	4061 3894 3482	4.29 5.44 7.17	5709 5572 5013
300/1	750 1000 1500	2.50 3.33 5.00	0.65 0.82 1.04	1157 1108 1000	1.00 1.31 1.77	2001 1913 1717	1.45 1.71 2.31	3345 3159 2874	2.01 2.39 3.21	4512 4238 3924	2.83 3.43 4.55	6779 6386 5758
500/1	750 1000 1500	1.50 2.00 3.00	0.46 0.57 0.74	1255 1206 1128	0.74 0.97 1.28	2236 2236 2080	1.04 1.24 1.71	3345 3345 3227	1.42 1.79 2.39	5140 4885 4512	1.64 2.16 3.13	6210 6210 6210
1000/1	750 1000 1500	0.75 1.00 1.50	0.30 0.36 0.48	1275 1236 1177	0.46 0.57 0.74	2197 2138 2030	0.65 0.74 1.06	3453 3384 3335	0.89 1.12 1.64	5140 5140 5140	1.12 1.42 2.01	6779 6779 6661
2000/1	750 1000 1500	0.38 0.50 0.75	0.19 0.24 0.32	1275 1236 1206	0.33 0.41 0.54	2246 2168 2109	0.35 0.45 0.61	3119 3119 3119	0.55 0.67 0.97	5199 5199 5199	0.74 0.97 1.27	7112 7112 7112
3000/1	750 1000 1500	0.25 0.33 0.50	0.12 0.15 0.21	1089 1089 1089	0.24 0.30 0.39	2374 2286 2109	0.27 0.36 0.48	2864 2864 2864	0.46 0.56 0.74	5307 5307 5307	0.59 0.74 1.04	7455 7455 7112
Nominal ratios listed are a typical selection of commonly used ratios from the overall range. Details of other ratios available on request.

Nominal Ratio	Nominal Input Speed r.p.m.	Nominal Output Speed r.p.m.	SIZE OF UNIT
			250		300		350		430
			Input KW	Output Torque Nm	Input KW	Output Torque Nm	Input KW	Output Torque Nm	Input KW	Output Torque Nm
150/1	750 1000 1500	5.00 6.66 10.0	7.46 8.95 11.19	10055 1378 8191	10.44 12.68 16.41	15931 14921 12998	13.43 17.16 23.12	19659 18874 17403	23.87 30.58 41.03	38426 36728 33903
300/1	750 1000 1500	2.50 3.33 5.00	4.32 5.44 7.01	10791 10281 9211	5.52 6.93 8.95	14803 14126 12939	9.70 11.93 15.66	25427 24074 21238	15.66 20.14 26.85	42948 41251 37288
500/1	750 1000 1500	1.50 2.00 3.00	2.91 3.58 4.85	11870 11242 10055	3.58 4.69 6.86	14401 14401 14401	5.15 6.79 9.70	21474 21474 21474	9.70 12.68 17.90	40682 40682 40682
1000/1	750 1000 1500	0.75 1.00 1.50	1.64 2.16 3.13	10173 10173 10173	2.76 3.50 4.84	19433 19041 18080	3.80 4.55 6.64	25535 25535 25535	6.12 7.46 11.19	45773 45773 45773
2000/1	750 1000 1500	0.38 0.50 0.75	0.82 1.04 1.56	11634 11634 11634	1.56 2.01 2.90	19208 19208 19208	2.24 2.83 4.10	27124 27124 27124	3.88 5.15 7.46	50286 50286 50286
3000/1	750 1000 1500	0.25 0.33 0.50	0.74 0.97 1.42	11075 11075 11075	1.11 1.49 2.16	17403 17403 17403	1.56 2.01 2.91	25761 25761 25761	2.61 3.36 4.70	46332 46332 46332
Nominal ratios listed are a typical selection of commonly used ratios from the overall range. Details of other ratios available on request.